Turning and Facing operations on workpiece to produce SPACER... using Lathe Machine!

Spacers play important role in Machinery Engineering.

Spacers are used...

* to maintain a precise and consistent  distance between components

* ensuring proper function

* preventing friction, 

* facilitating maintenance 

*providing electrical insulation /  thermal management.  

Spacers are of 2 types :

* Spacer may have a central hole 

* Spacer without hole.

The main operations involved  in producing spacer are,

Facing : to achieve the desired length (as per the specifications)

Turning : to make desired outer diameter 

and parting off to cut the spacer to final size. (In case of a spacer without central hole)

* If central hole i.e. hole in center is to be done then drilling operation is also to be carried out. 




This sequence of operations produces the spacer as per the dimensions specified... inner diameter ( in case of a hole ) , outer diameter and length. Proper facing operation will furnish required surface finish. 

Spacers in machinery are manufactured from variety of materials, including metals like mild steel (m s), stainless steel, aluminum, brass, and copper as well as plastics such as nylon, POM, and PEEK. 

Many other variety of components can be manufactured on Lathe Machine involving sequence of operations and choosing right type of tools.


Comments

Post a Comment

Popular posts from this blog

Lathe Machine

Image
Lathe Machine is known as the "Mother of all Machine Tools". It plays fundamental role in producing symmetrical forms i.e. shapes from materials like various metal , wood , plastic through operations such as cutting , drilling , facing and sanding. A Lathe is machine tool that rotates a workpiece about an axis of rotation to perform various operations on it. Following Common Operations can be carried out on Lathe Machine.  Turning: Reducing the diameter of the workpiece. Facing: Creating a flat surface on the end of the workpiece. Drilling: Creating holes in the center of the workpiece. Knurling: Creating a pattern of ridges on the workpiece. Thread Cutting: Creating helical grooves on the workpiece.   Key Components of Lathe Machine :  Bed: The base of the machine, providing a stable structure.  Headstock: Houses the spindle and the mechanism for rotating the workpiece.  Tailstock: Supports the opposite end of the workpiec...
Read more

Drilling operation on workpiece using Lathe Machine !

Image
Drilling operation generates a cylindrical hole in a solid material. A rotating drill bit is used which is a multi-point cutting tool. It is pressed into the workpiece to remove chips of material to make desired size i.e. as per the specification.  Performing a drilling operation on a Lathe Machine: The drill bit is mounted in the tailstock and fed into the rotating workpiece to create a hole , the sequence followed is described below.   Steps for Drilling on a Lathe : Prepare the Workpiece:  Ensure the end of the workpiece (where hole is to be done) is faced (smoothed) before drilling. Mount the Center Drill:  Fit the center drill in the drill chuck and then inert this drill chuck into the tailstock.  Align and Drill:  Slide the tailstock towards the workpiece and feed the center drill in workpiece to create a pilot hole. During this process stop when the tapered section is reached. Mount the Twist Drill:  Once the center drilling is ...
Read more